Jump to content

uhim

PRO OpenDTG'er
  • Posts

    204
  • Joined

  • Last visited

  • Days Won

    23

uhim last won the day on August 25 2023

uhim had the most liked content!

About uhim

  • Birthday 12/02/1971

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

uhim's Achievements

38

Reputation

  1. I have worked with this and similar fabrics, they are impregnated with water-repellent impregnation, so this fabric is very difficult to work with. This fabric can only be handled by screen printing with solvent ink, but not all solvent paints will work.It is necessary to look for solvent ink on textiles so that the paint does not crack and dries quickly. 58 Argon series - Texylon
  2. Thank you, I received the code, I will understand.
  3. In my opinion, not a good photo for the test, the test must be done on a test photo, for example ( Hakamada_test_sRGB.tif ) so that everyone can compare with the original and test it at home.
  4. I assume you have a short circuit in the head in the printer, the protection is triggered. Check the ribbon cable going to the printer head. There may be ink leakage, which led to the activation of the protection.
  5. Here is a photo of this white ink, the R3000 printer went through three passes. Near kodak, just smeared.
  6. I used this company DTG ink, cmyk of normal quality, white is just water! I fought with them for two months and did not achieve anything! I just got them to change the shelf life from 12 months to 6 months. I would not recommend you to buy anything from this company.
  7. hesitate to ask how to bypass the watermark in EKprint?
  8. I understand that you are going to print on this DTF printer, but you did not take into account the main thing, this is software control (RIP). I think this will be your big problem. I could be wrong, of course.
  9. In your photos, I realized that you manually pour the powder onto the film yourself? And one more question what kind of engine is over the stove! Does it draw or force air into the stove?
  10. Add 15-20 sheets of paper to the tray and insert the film over the top of the paper. The film wakes up closer to the pickup roller.
  11. Can! It will even have better two-pass print quality.
×
×
  • Create New...