Discuss rip software from makers EK Print Studio, Kothari, Cadlink, AcroRIP, etc
By KenR60
#4364
Hello Everyone, I have a Epson R2400 Printer and using AcroRip 8.1.  I have gotten everything working other then the White Ink.

I have set the Ink order as KCMY XXXX and added White ink to the last 2 CISS Bottles ( KCMY . . WW ) but when I print no white is coming through.

Thanks in Advance
User avatar
By Andy
#4374
KenR60 wrote:Hello Everyone, I have a Epson R2400 Printer and using AcroRip 8.1.  I have gotten everything working other then the White Ink.

I have set the Ink order as KCMY XXXX and added White ink to the last 2 CISS Bottles ( KCMY . . WW ) but when I print no white is coming through.

Thanks in Advance
I'm not familiar with AcroRIP but typically in the RIP software you need to enable white underbase.
User avatar
By reptilesink
#5841
I use acrorip 8.2.6 with my r2400.
The first 4 carts from left to right are white and the others are the standard colours.
I can print using either cart 1+2 or 3+4 or all 4 white.
Make sure the carts are primed properly to get air out of the system.