DIY DTG - Build your own Digital T-Shirt Printer

 
User avatar
sonyoasis
Contributor
Posts: 25
Joined: Sat Aug 20, 2016 12:14 pm

Re: P600 0x53 Error

Thu Apr 13, 2017 2:21 pm

Hey t-dozer runs in sheet mode i will have a look into error 53 for you . 
 
User avatar
sonyoasis
Contributor
Posts: 25
Joined: Sat Aug 20, 2016 12:14 pm

Re: P600 0x53 Error

Thu Apr 13, 2017 3:32 pm

Where have you mounted the ASF relay board? In The T-dozer conversion videos Jeff says to mount it on a metal lug which used to hold the ASF unit . Way back when i did my first t-dozer build i had a problem with that location. The printer would throw up an error, after removing it from that metal lug the printer would boot up. Unfortunately i cant remember if it it was error 53 but worth a try first. 
 
tjello
Contributor
Posts: 81
Joined: Tue Sep 27, 2016 12:07 pm
Location: Oslo - Norway

Re: P600 0x53 Error

Sun Apr 16, 2017 4:48 am

Its not possible to use a different motor and different pulley with the t-dozer is it?
 
User avatar
sonyoasis
Contributor
Posts: 25
Joined: Sat Aug 20, 2016 12:14 pm

Re: P600 0x53 Error

Fri Apr 21, 2017 4:06 am

I think it would require a code change to use a different set up as the timings would be off? If its a new T-Dozer stepper motor you are after PM me and i can send you a link on where to get it. 

Who is online

Users browsing this forum: No registered users and 1 guest