User avatar
By Andy
#2889
For troubleshooting it is important to know the error code that the Epson p600 is giving you and then look it up on this list.

Sometimes the error code is displayed on the screen other times you need a tool like http://www.wic.support/ to read it. This list is also in the wic reset tool
You do not have the required permissions to view the files attached to this post.
#5053
Andy wrote: Para solucionar problemas, é importante conhecer o código de erro que a Epson p600 está lhe dando e, em seguida, pesquisá-lo nesta lista.

Às vezes, o código de erro é exibido na tela outras vezes que você precisa de uma ferramenta como  http://www.wic.support/  para lê-lo. Esta lista também está na ferramenta wic reset
This error is what? When you start the printer
Erro fatal
Código de erro OA30 ou 0A30
#5054
Help me !!
I adapted an epson p600 to DTG
And when I start  "fatal error 0A30" appears
I did not find anything talking about this mistake
What can it be ?

Weeks before , Starts and this image appears
With this loading symbol
Image
 and soon after the same fatal error appeared

Now it is only giving the direct error. 

heeeeeeeeeelp
#5574
How do you handle the "Push to open manual feed tray" error? I was messing around in EKPrint and went to print a test color channel page and that message pops up. It did not give that message on the Ink Settings button page where you can print a test pattern.
#5577
MiniFireDragon wrote:
Wed Aug 30, 2017 8:00 pm
How do you handle the "Push to open manual feed tray" error? I was messing around in EKPrint and went to print a test color channel page and that message pops up. It did not give that message on the Ink Settings button page where you can print a test pattern.
Make sure EK is in Sheet mode not roll mode.
#5606
Good day, i would like to ask how to fix a error code 0x80? since i only brought my epson P600 mainboard in ebay someone selling a epson parts.. first i turn on my printer and i see an start select a language so i choose english and normally preparing then after in my LCD there is error code 0x80.. can someone help me to this problem.. thank you
#5607
TROY1974 wrote:
Fri Sep 08, 2017 8:07 am
Good day, i would like to ask how to fix a error code 0x80? since i only brought my epson P600 mainboard in ebay someone selling a epson parts.. first i turn on my printer and i see an start select a language so i choose english and normally preparing then after in my LCD there is error code 0x80.. can someone help me to this problem.. thank you
You can check the small fuses on the mainboard. They are marked F and then a number.

More than likely you will need to get a new mainboard.
#5611
I bought a board from Compas Micro with the understanding that it was not set up by Epson and would not likely be able to get it to run. I gave it a shot by downloading an image from a good P600 board I had but that didn't work. Hence I gambled and lost $80.

It sounds like the board you bought was not setup by Epson. You have to be careful buying Epson mainboards since a new board does not mean it's been set up by Epson Service Techs.
Andy liked this