Discuss and collaborate Arduino controlled DIY DTG
By chibukh
#4323
Hi Andy,
sorry for my English.
Is it possible to use your Arduino code to use stepper motor instead of epson motor? 
How I can plug encoder to Arduino. Do you have manuals? Starting my second project with Epson WF-7110 DTW. First was Epson R200.
User avatar
By Andy
#4375
I don't have any experience with the WF-7110. It is possible but you will need to study and learn the printer very well.

First time DIY DTG users are best to use Epson 1430 or P600. These models have the most support and online information
By chibukh
#4414
Andy wrote:I don't have any experience with the WF-7110. It is possible but you will need to study and learn the printer very well.

First time DIY DTG users are best to use Epson 1430 or P600. These models have the most support and online information
Thank you for answer. Could you tell me how to connect arduino with stepper motor to encoder. I'm gonna make it, for now, friction drive. How to make stepper motor to work like mirror of pf motor. Which library to use? Do you have manual?
User avatar
By Andy
#4418
Read through this section of the forum: viewforum.php?f=19
You aren't going to find any 7110 specific information, that's not a commonly used DTG model. So if you use that model you will be more on your own have have a greater challenge.
By chibukh
#4419
Andy wrote:Read through this section of the forum: viewforum.php?f=19
You aren't going to find any 7110 specific information, that's not a commonly used DTG model. So if you use that model you will be more on your own have have a greater challenge.
Everything is ok. I need only this right now.