DIY DTG - Build your own Digital T-Shirt Printer

 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

OpenDTG AIO V1 DTG Controller with USB

Mon Nov 28, 2016 9:56 am

OpenDTG AIO v1

Build 00003

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 (All in One) DTG Controller Downloads

Fri Dec 23, 2016 7:45 pm

Build 00005

- This update adds support for the OpenDTG Desktop app. You are able to use physical buttons, the desktop app or both to control your platen.

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 (All in One) DTG Controller Downloads

Tue Dec 27, 2016 2:27 pm

Build 00006

-  Added code to slow down the platen before it hits back limit switch and front maxSteps.

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 (All in One) DTG Controller Downloads

Sat Feb 11, 2017 2:08 pm

Build 00010

-  Fixes for ASF timing issues. 

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board that has the built in USB port. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 DTG Controller with USB

Wed Mar 15, 2017 11:42 am

Build 00014

-  Fixes for ASF timing issues. 

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board that has the built in USB port. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 DTG Controller with USB

Thu Apr 06, 2017 9:59 am

Build 00016

-  Removed stray line of serial code

-  Changed microstepping back to previous settings

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board that has the built in USB port. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.
 
User avatar
Andy
Site Admin
Topic Author
Posts: 1429
Joined: Mon Jul 25, 2016 5:59 pm

Re: OpenDTG AIO V1 DTG Controller with USB

Tue Jun 06, 2017 7:45 pm

Build 00017

- Added ASF code shared by jeremyroyer (No longer need ASF stepper motor plugged in or ASF cable from Epson to AIO)

- Added 1430 info in settings.h  shared by randyb123
- Removed Debug for now. Will implement better later

Requires bounce2 and encoder libraries to be installed in Arduino IDE.

NOTE: ONLY use this code as is with the OpenDTG AIO V1 controller board that has the built in USB port. This code relies on hardware that protects the Epson from voltages greater than 3.3v. We are not responsible to any damage to your Epson printer. Use at your own risk.
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 1 guest