DIY DTG printers without additional electronics added.
By Gheise1
#5363
Andy wrote:Download the Wic reset utility: viewtopic.php?f=23&t=654

It has the ink charge feature.
Andy and friends, can you give me a hand?
I made adaptation in a p600 in homemade mode without motorization, it works very well, not of the errors. I bought new cartridges and a normal ink (non-original epson) for testing
But my prints are coming out like this - see in the photos
Images without focus, no print quality, no sharpness at all
The weak colors. Using the same epson program
What can it be? The paint of bad quality?Image
I have not put dtg ink on it yet.
User avatar
By Andy
#5365
Gheise1 wrote:
Andy wrote:Download the Wic reset utility: viewtopic.php?f=23&t=654

It has the ink charge feature.
Andy and friends, can you give me a hand?
I made adaptation in a p600 in homemade mode without motorization, it works very well, not of the errors. I bought new cartridges and a normal ink (non-original epson) for testing
But my prints are coming out like this - see in the photos
Images without focus, no print quality, no sharpness at all
The weak colors. Using the same epson program
What can it be? The paint of bad quality?Image
I have not put dtg ink on it yet.
Either the printhead is too far away or your drive is slipping.
By Gheise1
#5368
I check the nozzles and everything is correct, no faults

But when I'm going to print a test page, print it like this, see.
double 
Image

I do alignment and it goes out like this
Practically almost every square with stripes and especially the # 3, # 6 and # 9 comes out weak and very bad.
Image
what do I do ? My printer is new I almost did no prints on it.



User avatar
By Andy
#5370
I would guess it is a build issue not the Epson printer. Your bed is slipping when it moves.