DIY DTG printers without additional electronics added.
User avatar
By rickyride
#320
Keep the pe sensor Wire and cut it in one side and use apg connector
you need to have spare of APg sensor 

after you need to joined APg connector to PE wire

now you use apg sensor as PE sesnor that is bigger, when there is conpenents in pag sensor = no paper  when the is nothing in apg sensor = Paper

i will search picture it should be bester than this
User avatar
By rickyride
#358
yes Andy it's not very stable, it's cheap material,  but for personnal use it's good option.
my problem was difference bewteen left and right side during the adjustement.
User avatar
By rickyride
#383
pe-hack.png
For PE sensor this picture to explain

the two wires on the top are orginal pe wire and original Apg wire

under the pe wire is cuted and connected to apg connector ( the black wire of original PE wire need to be in center position on Apg connector)
You do not have the required permissions to view the files attached to this post.
By azdamz
#1145
Hi.You print white ink use theatment water?and brand white ink?.I print white ink not good.Sorry I little speak english.Best regard.Jacko
By camposz
#1204
rickyride wrote:pe-hack.png
For PE sensor this picture to explain

the two wires on the top are orginal pe wire and original Apg wire

under the pe wire is cuted and connected to apg connector ( the black wire of original PE wire need to be in center position on Apg connector)
THANK YOU , and finally you could show a picture of how you have it installed in your printer?