DIY DTG - Build your own Digital T-Shirt Printer

 
User avatar
rickyride
Contributor
Topic Author
Posts: 198
Joined: Thu Aug 04, 2016 3:21 pm

Re: Epson 1400 friction mode

Tue Sep 20, 2016 12:56 pm

i can suggest to add 4 spring on each corner of labjack that should give more stability.
 
pitbullgti
Posts: 3
Joined: Wed Sep 21, 2016 4:18 pm

Re: Epson 1400 friction mode

Wed Sep 21, 2016 4:42 pm

Hey,
First of all, congrats on the project, really nice clean job.
I have a Epson 1410, and will also be doing this conversion soon.

Need to know the size of the 1st aluminium plate and the top one where you put the shirt, and also the smaller aluminium squares you used to keep the structure straight, cant find it in your posts.


Thank you  ;)
 
mastodon69
Posts: 21
Joined: Tue Sep 13, 2016 1:22 am

Re: Epson 1400 friction mode

Fri Sep 23, 2016 5:45 am

rickyride wrote:
i can suggest to add 4 spring on each corner of labjack that should give more stability.

Good idea , i will try to order 2 of 10x10cm labjacks and connect them in line , hoping to get stable lifting table for 30x42 UV flatbed table .
 
huaonly
Posts: 7
Joined: Mon Mar 20, 2017 9:38 am

Re: Epson 1400 friction mode

Sun Jul 09, 2017 2:44 am

rickyride wrote:
pe-hack.png
For PE sensor this picture to explain

the two wires on the top are orginal pe wire and original Apg wire

under the pe wire is cuted and connected to apg connector ( the black wire of original PE wire need to be in center position on Apg connector)

the board in the picture is from epson 1390. can you  tell me or sshow me the picture
  how and where to connect to printer[url=<a]Image[/url]">hack APG,PE sensoe
 
User avatar
rickyride
Contributor
Topic Author
Posts: 198
Joined: Thu Aug 04, 2016 3:21 pm

Re: Epson 1400 friction mode

Sat Jul 15, 2017 8:46 am

rickyride wrote:
pe-hack.png
For PE sensor this picture to explain

the two wires on the top are orginal pe wire and original Apg wire

under the pe wire is cuted and connected to apg connector ( the black wire of original PE wire need to be in center position on Apg connector)

cked it you need to mix the Pe wire to put it in relay board with APG sensor wire
APG sensor will used instead of PE sensor
 
User avatar
rickyride
Contributor
Topic Author
Posts: 198
Joined: Thu Aug 04, 2016 3:21 pm

Re: Epson 1400 friction mode

Sat Jul 15, 2017 8:47 am

check it  here

Who is online

Users browsing this forum: No registered users and 1 guest