Page 1 of 1

P600 first use: Epson original Ink or Textil Ink?

Posted: Thu Aug 31, 2017 6:55 pm
by charliemdq
Hello,

I've a basic basic question. What do you recommend?
* Use original Epson ink while build the printer base, and for firsts tests. Then, when finish the DTG printer, clean the systema and change ink to textil ink

or

* Use textil ink (Dupont Artistri) from first time

Thanks!

Re: P600 first use: Epson original Ink or Textil Ink?

Posted: Thu Aug 31, 2017 7:42 pm
by Andy
charliemdq wrote:
Thu Aug 31, 2017 6:55 pm
Hello,

I've a basic basic question. What do you recommend?
* Use original Epson ink while build the printer base, and for firsts tests. Then, when finish the DTG printer, clean the systema and change ink to textil ink

or

* Use textil ink (Dupont Artistri) from first time

Thanks!
I strongly suggest using the Epson inks first. This way you don't have to worry about clogging while you're trying to get it built and tested.

Re: P600 first use: Epson original Ink or Textil Ink?

Posted: Fri Sep 01, 2017 5:49 am
by charliemdq
Andy wrote:
Thu Aug 31, 2017 7:42 pm
charliemdq wrote:
Thu Aug 31, 2017 6:55 pm
Hello,

I've a basic basic question. What do you recommend?
* Use original Epson ink while build the printer base, and for firsts tests. Then, when finish the DTG printer, clean the systema and change ink to textil ink

or

* Use textil ink (Dupont Artistri) from first time

Thanks!
I strongly suggest using the Epson inks first. This way you don't have to worry about clogging while you're trying to get it built and tested.
Thanks Andy. I'll take your advice

Re: P600 first use: Epson original Ink or Textil Ink?

Posted: Fri Sep 01, 2017 9:20 am
by ddelgrande
Yes, use the Epson inks and make sure you've purchased a chip resetter and a set of refillable cartridges which you will use to flush the ink lines when you change over to DTG Inks. Best way to flush the lines is with wicreset.