I changed the code and now it is working very well!
Will we get to see the beast in action?
MetalGuru wrote:One recommendation I would add is to turn off the motor when it is resting at the front.
Similar to the DTG code.
Not sure if I could just copy that part from the dtg code, or if there would be a more specific way to do it.
// Motor Off
// Motor on
MetalGuru wrote:The solenoid works well. Not sure how long it will last, but it does work.
The assembly does drip a little bit after shutoff sometimes. Not enough for me to worry about it tho.
MetalGuru wrote:Here are some pictures of the pretreat machine so far.
Still in prototype stage for looks, but it works well.
Assembled it with openbuild parts I had lying around.
May need to change the pump I have, not sure tho.
I have a 60psi pump and the spray pattern is dense in the middle and lighter on the edges. Not too bad, but want to have a more perfect spray pattern.
I am waiting for a new nozzle tip to see if that will fix it.
If not, I will try to increase pressure.